Lubricants & cutting oils for highest demands in machining.

High-performance cooling lubrication concentrate

Must be stirred in water

The oil is mixed with water by continuous stirring(put oil in water). The result will be a great and high-yield universal cooling lubricant-oil;l.

Characteristics:
  • Mineral oil that is not hazardous goods in the sense of provisions under traffic law
  • Rust-protection
  • Does not contain any heavy metals
  • Nitrite- and chlorine-free
  • Suitable for minimum lubrication
Use:
Increases the service lives and surface quality sufficiently in SAWING, CUTTING, TAPPING, GRINDING, DRILLING, TURNING.
Mix:
5% oil in water for steels with low rigidity (construction steels) as well as NF-metals (aluminium, copper, brass)

Put 10% oil in water for high-alloy steels (stainless steels). Increase the oil share for the most difficult chipping problems or use the pure oil only.


MECUTSPRAY BIO-high-performance cutting oil for difficult, chipping processing.

Built from plant materials;environmentally compatible spray oil; propellant-free.

Use:
great for sawing, milling, drilling, turning, grinding and tapping.
Benefits:
with lubrication-improving additives â?? free of mineral oil shares;contains corrosion-protective additive â?? aging-stable.
Usage note:
Apply right to the workpiece/tool. Let act for a short time. Repeat process if required.
Characteristics:
  • Very longtool service lives
  • Improved surface quality
  • Works anti-corrosively
  • 100% effective-substance content
  • Propellant-free
  • Environmentally compatible
  • Biologic degradation >90%
  • According to CEC-L-33-T-82
  • Suitable for minimum lubrication

Specifically suitable for processing of difficult-to-machine materials, such as rust- and heat-resilient steels, nickel alloys, titanium, steel, aluminium and aluminium alloys.


MECUT FOAM

High-performance foam spray

  • Foam adheres to the tool
  • No droppingorsplashing
Characteristics:
  • Sulphur-free
  • Mineral-oil-free
  • Very good adhesive properties
Use:
Increases the service lives and surface quality considerably for SAWING, MILLING, TAPPING, GRINDING, DRILLING, TURNING

For machining of all steel types as well as NF-metals such as aluminium, copper, brass.


Universal cutting paste

CHLORINE-FREE.

  • Paste adheres to the tool.
  • No dripping or splashing.

Ideal for working in forced positions such as "user overhead" and in machines without coolant facilities.

Use:
Increases the service lives and surface quality considerably for SAWING, MILLING, TAPPING, GRINDING, DRILLING, TURNING.

For machining of all steels as well as the most difficult materials such as titanium, manganese, steel cast, chrome-nickel or molybdenum steels.

Also great for all non-ferrous metals such as aluminium, copper, brass.


MECUT WAX high-performance cooling lubrication pin

Silicone-free.

  • Wax adheres to the tool.
  • No dripping orsplashing

Ideal for working in forced positions such as "user overhead" and in machines without coolant facilities.

Use:

Significantly increases service lives and surface quality in:

  • SAWING
  • MILLING
  • TAPPING
  • GRINDING
  • DRILLING
  • TURNING

For machining of all steel types as well as NF-metals such as aluminium, copper, brass.