BLUE-MAG Magnetic hole cutting machines

The magnetic hole cutting machine series BLUE-MAG stands for maximum variability, precision and reliability. This Karnasch redevelopment is regarded as a highlight among magnetic core drilling machines and offers not only our magnetic sensor but also the patented dovetail slides. The Karnasch BLUE-MAG series offers versatile solutions from the compact angle core drilling machine for cramped use upside down to large machines for universal use for core drilling up to 140 mm, twist drilling up to 50 mm, countersinking up to 80 mm, reaming up to 52 mm and tapping up to 44 mm.

Overview:
Core drilling up to 140 mm
Spiral drilling up to 50 mm
Countersinking up to 80 mm
Reaming up to 52 mm
Thread-cutting up to 44 mm
Magnet-Kernbohrmaschinen
CONSISTENTLY "ONLY THE BEST":
Magnet-Kernbohrer
This starts with the most important, THE MOTOR. Eibenstock motors 100% Made in Germany are and will remain the best choice when it comes to performance and reliability, motors with high torque and low maintenance.
Magnet-Kernbohrer
This goes on with the slide. Our “HEAVY-DUTY” Twin Rail Slide System (PATENTED) is by far superior to standard dovetail slides in the points of stability and precision.
Magnet-Kernbohrer
The heart of our magnetic hole cutting machines robust electronic switching units with ergonomically designed switch panels. Controlled by Hightech P.C.B Electronic circuitry built with safety in mind. We have interlocking systems ensuring that magnet must be energized before motor can be started. This high-tech P.C.B control system is common to all models.
Magnet-Kernbohrer
MAG-TEC SENSOR: The sensor detects how well the magnet keeps the machine on the ground. It is directly connected to the engine If the sensor is illuminating "RED" , the ground is dirty (rust, varnish residues, chips), the material is thinner than 6 mm or the feed rate is to high. The machine does not have a safe stand. The engine does not start or turns off. If the sensor is illuminating "GREEN", the magnetic holding force is optimal and the use of the machine is safe.
Magnet-Kernbohrer
All models of machines are equipped with a rear stabilizer for even more holding power and stability.
Magnet-Kernbohrer
Removable coolant tank for external mounting with magnetic clip supplied. Coolant tank with quick release hose system and coolant fine adjustment. Well thought out and practical.
Magnet-Kernbohrer
Compact and robust main body housing made of High Grade Cast Aluminium.
Magnet-Kernbohrer
Ergonomic designed two way handle for perfect balance when handling and positioning machine.
Magnet-Kernbohrer
All machines equipped with automatic internal coolant supply through 19 mm (3/4") Weldon or 32 mm (1.¼") Weldon arbors.
Magnet-Kernbohrer
Almost all models available with swivel base 360 degrees and larger models with additional 16 mm or 22 mm forward/back sliding and lock, for maximum flexibility when positioning the machine.
A. Place the machine
B. Secure with magnet
C. Subsequently positioned precisely and locked ready to drill
Magnet-Kernbohrer
Consistently only the best transport/storage boxes. All machines supplied in heavy-Duty, dust and waterproof sealed boxes with internal protective lining. Ideal protection of machines in tough conditions.

HEAVY-DUTY TWIN RAIL SLIDE SYSTEM:
Magnet-Kernbohrer
Magnet-Kernbohrer
Magnet-Kernbohrer


ADVANTAGES OF NEW TWIN RAIL SLIDE SYSTEM "HEAVY-DUTY" OVER MACHINES WITH OLD DOVETAIL SYSTEM.
  • Up to 10 times better stability.
  • Extremely tight tolerances of the slide through the round Twin Rail system.
  • The slide has no contact with the main body of the machine. The whole construction is connected only by the highly precise and extremely stable rail system.
    • Reduced friction / less wear
    • Low maintenance / better reliability
RESULT:
  • Improved cutter life
  • Reduced cutter breakage
  • Improved hole tolerances
  • Improved hole surface quality
  • Up to 110 mm cutting depth possible already with small machines
THE NEW MAG-TEC SENSOR:
    The sensor detects how well the magnet keeps the machine on the ground.
  • It is directly connected to the engine.
  • If the sensor is illuminating "RED" , the ground is dirty (rust, varnish residues, chips), the material is thinner than 6 mm or the feed rate is to high.
    The machine does not have a safe stand. The engine does not start or turns off.
  • If the sensor is illuminating "GREEN", the magnetic holding force is optimal and the use of the machine is safe.
Mag-Tec-Sensor

SCOPE OF DELIVERY:
Magnet-Kernbohrer

The machines are delivered instantly ready to use. Complete with all neccessary tools and additional parts.

Magnet-Kernbohrer

Tools and additional parts: Safety Chain/carabina, coolant bottle with fixing bracket and magnetic holder.

Magnet-Kernbohrer

Consistently “ONLY THE BEST” machinery requires only the best available transport boxes. All machines supplied in heavy-duty dust and water proof sealed transport containers with internal protection. Ideal for machines used in tough conditions.